As a part of diversification programme, we have commenced dealing in complete range of Positive Displacements Pumps such as:
Confirming to API 676 StandardsMounting:
Casing: Cast Iron, Cast Steel, Cast Stainless Steel
Liner: Cast Iron, Cast Stainless Steel
Screws: Alloy Steel, Nitride Steel & Stainless Steel.
While in operation, the screws are in hydrodynamics balance on film lubrication and do not require any additional bearings. The one ball bearing often used is only for axial positioning of a rotor and safer operation of mechanical seals. Small rotor dimensions enable the pump to be operated at high speeds directly coupled 3000 or 3600 RPM motors or other prime movers. Such unique design and features had demonstrated excellent reliability with pumps in operation continuously on- stop for decades together without replacement of any components or maintenance on clean fluids.Key Features – Benefits that Reduce life cycle cost
Capacity : From 1 to 400 M3/Hr
Pressure : Up to 64 Kg/cm2
Viscosity : 1-1, 00,000 Centi Stokes
Temperature: Up to 300 .C
These Pumps are designed for handling clear viscous liquids and are suitable for different pressures up to 70 bars. The pumping elements comprise of a power screw and two idler screws, running in a close fitting insert. The idler screws serve to maintain the closed chambers that pump the liquid. Each screw is provided with a drum so that axial forces are hydraulically balanced. The shaft seal chamber is connected internally to the inlet and the seal is therefore always subjected to the inlet and the seal is therefore always subject to inlet pressure only. The inserts screws and balancing bushes together with bearing and seals for a replaceable cartridge that is located inside a casing. The pumps can be supplied in a variety of materials of construction and for various mounting arrangements.
The principle of operation of our Sanitary Lobe pumps is two synchronised rotors (Lobes) rotating against each other build chambers towards the casing of the pump. At the suction side, the fluid enters the chambers and during rotation, the fluid is displaced in the direction of the volume flow into the Discharge side.Salient Features:
THE INTERNAL GEAR PUMPS ARE USE TO HANDLE THE FOLLOWING CLEAR FLUIDS
Food and cosmetic products capable of being pumped by lobe rotor pumps.
Capacity : from 50 lph — 50,000 lph
Pressure : up to 10 Kg/cm2
Viscosity : as low as 1.0 Centre stoke — 3,00,000 Centre stoke
Internal Gear Pumps belongs to family of Positive Displacement Pumps where in driving gear with internal tooth drives the Gear and turns in same direction inside the pump casing.During the rotation of the driving gear the liquid intake takes place at the suction and during the gear meshing, the liquid is displaced outside in the delivery side.Advantages of Gear Pumps
Capacity : From 10 Lph — 45,000 Lph
Pressure : up to 10 Kg/cm2
Viscosity : As Low as 1.0 Centre stoke — 300,000 Centre stoke
The Internal Gear Pumps are used to handle the following clear fluids
We are involved in the supplying and trading of Positive Displacement Gear Pump that is provided with foot and flange mounting options. Provided with self-primping pump, it offers a hassle free functioning. Our entire range of gear pump is made available in single helical gear design. In addition to this, this offered pump finds a vast application in cleaning and cooling systems, oil filtration systems, petroleum industries and heating systems.